Marine Shopping/Electrical

Illuminated Toggle Switch - SPST - 4 Terminals - Off-White On-Red

Illuminated Toggle Switch - SPST - 4 Terminals - Off-White On-Red Clear plastic handle changes from clear to red. Neoprene seal in shaft. Can be wired directly or indirectly which will control the red illumination. 15/32" mounting stem fits into dash boards up to 1/8" thick. 1/4" brass blade terminals. 25 Amps @ 12v DCModel:TG40060

Push-Pull Switch - Off-On#1-On#1

Push-Pull Switch - Off-On#1-On#1 Push pull switch. Pull one time energize one 1st and 2nd terminal. Pull one more time and energize 1st and third terminals. Used for navigation lights with masthead or steaming light or other lighting applications. Solid brass switch body and threaded stem. Four brass screws, brass mounting bushing, chromed brass hex face nut and pull knob. Rated 15 Amps at 12v DC.Model:MP39620

Push-Pull Switch Off-On1-On1&2

Push-Pull Switch Off-On1-On1&2 Push pull switch. Pull one time energize one circuit. Pull one more time and both circuits are on. Solid brass switch body and threaded stem. Three brass screws, brass mounting bushing, chromed brass hex face nut and pull knob. Rated 15 Amps at 12v DC.Model:MP39580

Waterproof Switch Panel

Waterproof Switch Panel Panels are 1/8'' thick, corrosion resistant aluminum with black polyurethane finish. All circuit breakers are hydraulic/magnetic, trip free, UL recognized and CSA certified. Panels are equipped with a preloaded breaker amperage configuration. 20 interchangeable function labels come standard including all mounting hardware necessary. 2 year warranty.

Tip Light Toggle Switch - Clear Boot Nut Cover

Tip Light Toggle Switch - Clear Boot Nut Cover Tip light changes from clear to red when switch is on. 15/32" mounting stem fits into dash boards up to 1/8" thick. 1/4" brass blade terminals. 25 Amps @ 12v DC.Model:MP39240

Heavy Duty Foot Switch

Heavy Duty Foot Switch This uncovered high-amp footswitch is capable of handling windlass loads without an external solenoid or control box. 200 Amp continuous rating at 12V. Uncovered footswitch features a chromed-bronze trim ring. 4" dia.

Heavy Duty Foot Switch Covered Black

Heavy Duty Foot Switch Covered Black These covered high-amp footswitch is capable of handling windlass loads without an external solenoid or control box. 200 Amp continuous rating at 12V. Includes a rugged, fiberglass reinforced polyester hinged cover that opens flat on deck while the switch is in use-when not in use, cover closes over switch to prevent accidental operation 4" dia. In Black.

Salt Water Series Battery Switch w/ Field Disconnect

Salt Water Series Battery Switch w/ Field Disconnect Allows boaters to choose between any combination of two batteries. A switch with alternator disconnect is available for use when the batteries are shut off but the engine is still running. Alternator disconnect eliminates possible damage to the alternator, a valuable assurance that the alternator is protected. All Charles Battery Selector Switches are ignition protected and meet USCG and ABYC standards.

Big Foot Dimmer Contol Switch

Big Foot Dimmer Contol Switch Control your interior or exterior lighting with this marine grade dimmer control switch. 12 Volts and it is easy to install!

Toggle Switch w/ Boot

Toggle Switch w/ Boot SPST Off-On switch with rubber boot for stem. 15/32" mounting stem fits into dash boards up to 1/4" thick. Two tin plated copper leads. 35 Amps @ 12v DCModel:TG19560